To flash your Intex Aqua Pro, you need to download the Intex Aqua Pro stock ROM whose download link is enclosed within here, then, follow the step by step instructions below to flash stock firmware on your Intex Aqua Pro.
Please note that flashing this Stock ROM Firmware on your Intex Aqua Pro will format and restore your device to factory defaults settings, hence, making you loose all the files therein. Therefore, you are advised to make a backup if you need to retain your files and data.
Note: If your Aqua Pro is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.
Intex Aqua Pro Stock ROM Firmware Download Link(s)
1. Intex Aqua Pro (v08 India SER) Stock Firmware
2. Intex Aqua Pro (V10 India SER) Stock Firmware
How to Flash Stock Firmware On Intex Aqua Pro
1. Download your Intex Aqua Pro stock ROM firmware from the link above.
2. Extract the Intex Aqua Pro Firmware you downloaded from the link above onto a folder on your PC.
3. Download and install Spreadtrum android device drivers on your PC. You may skip this step if you have installed spreadtrum drivers on your PC already otherwise, download SPD drivers from here
4. Now, choose either of the tools listed below here to load the stock firmware on your Intex Aqua Pro.
Note
1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Intex Aqua Pro.
2. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Intex Aqua Pro, if need be.
